Inactivation of hydrogenase-3 leads to enhancement of 1,3-propanediol and 2,3-butanediol production by Klebsiella pneumoniae.

Klebsiella pneumoniae can use glucose or glycerol as carbon sources to produce 1,3-propanediol or 2,3-butanediol, respectively. In the metabolism of Klebsiella pneumoniae, hydrogenase-3 is responsible for H2 production from formic acid, but it is not directly related to the synthesis pathways for 1,3-propanediol and 2,3-butanediol. In the first part of this research, hycEFG, which encodes subunits of the enzyme hydrogenase-3, was knocked out, so K. pneumoniae ΔhycEFG lost the ability to produce H2 during cultivation using glycerol as a carbon source. As a consequence, the concentration of 1,3-propanediol increased and the substrate (glycerol) conversion ratio reached 0.587 mol/mol. Then, K. pneumoniae ΔldhAΔhycEFG was constructed to erase lactic acid synthesis which led to the further increase of 1,3-propanediol concentration. A substrate (glycerol) conversion ratio of 0.628 mol/mol in batch conditions was achieved, which was higher compared to the wild type strain (0.545 mol/mol). Furthermore, since adhE encodes an alcohol dehydrogenase that catalyzes ethanol production from acetaldehyde, K. pneumoniae ΔldhAΔadhEΔhycEFG was constructed to prevent ethanol production. Contrary to expectations, this did not lead to a further increase, but to a decrease in 1,3-propanediol production. In the second part of this research, glucose was used as the carbon source to produce 2,3-butanediol. Knocking out hycEFG had distinct positive effect on 2,3-butanediol production. Especially in K. pneumoniae ΔldhAΔadhEΔhycEFG, a substrate (glucose) conversion ratio of 0.730 mol/mol was reached, which is higher compared to wild type strain (0.504 mol/mol). This work suggests that the inactivation of hydrogenase-3 may have a global effect on the metabolic regulation of K. pneumoniae, leading to the improvement of the production of two industrially important bulk chemicals, 1,3-propanediol and 2,3-butanediol.

The pyruvate decarboxylase activity of IpdC is a limitation for isobutanol production by Klebsiella pneumoniae.

BACKGROUND: Klebsiella pneumoniae contains an endogenous isobutanol synthesis pathway. The ipdC gene annotated as an indole-3-pyruvate decarboxylase (Kp-IpdC), was identified to catalyze the formation of isobutyraldehyde from 2-ketoisovalerate. RESULTS: Compared with 2-ketoisovalerate decarboxylase from Lactococcus lactis (KivD), a decarboxylase commonly used in artificial isobutanol synthesis pathways, Kp-IpdC has an 2.8-fold lower Km for 2-ketoisovalerate, leading to higher isobutanol production without induction. However, expression of ipdC by IPTG induction resulted in a low isobutanol titer. In vitro enzymatic reactions showed that Kp-IpdC exhibits promiscuous pyruvate decarboxylase activity, which adversely consume the available pyruvate precursor for isobutanol synthesis. To address this, we have engineered Kp-IpdC to reduce pyruvate decarboxylase activity. From computational modeling, we identified 10 amino acid residues surrounding the active site for mutagenesis. Ten designs consisting of eight single-point mutants and two double-point mutants were selected for exploration. Mutants L546W and T290L that showed only 5.1% and 22.1% of catalytic efficiency on pyruvate compared to Kp-IpdC, were then expressed in K. pneumoniae for in vivo testing. Isobutanol production by K. pneumoniae T290L was 25% higher than that of the control strain, and a final titer of 5.5 g/L isobutanol was obtained with a substrate conversion ratio of 0.16 mol/mol glucose. CONCLUSIONS: This research provides a new way to improve the efficiency of the biological route of isobutanol production.

Blocking the 2,3-butanediol synthesis pathway of Klebsiella pneumoniae resulted in L-valine production.

Klebsiella pneumoniae is a 2,3-butanediol producing bacterium. Nevertheless, a design and construction of L-valine production strain was studied in this paper. The first step of 2,3-butanediol synthesis and branched-chain amino acid synthesis pathways share the same step of α-acetolactate synthesis from pyruvate. However, the two pathways are existing in parallel and do not interfere with each other in the wild-type strain. A knockout of budA blocked the 2,3-butanediol synthesis pathway and resulted in the L-valine production. The budA coded an α-acetolactate decarboxylase and catalyzed the acetoin formation from α-acetolactate. Furthermore, blocking the lactic acid synthesis by knocking out of ldhA, which is encoding a lactate dehydrogenase, improved the L-valine synthesis. 2-Ketoisovalerate is the precursor of L-valine, it is also an intermediate of the isobutanol synthesis pathway, while indole-3-pyruvate decarboxylase (ipdC) is responsible for isobutyraldehyde formation from 2-ketoisovalerate. Production of L-valine has been improved by knocking out of ipdC. On the other side, the ilvE, encoding a transaminase B, reversibly transfers one amino group from glutamate to α-ketoisovalerate. Overexpression of ilvE exhibited a distinct improvement of L-valine production. The brnQ encodes a branched-chain amino acid transporter, and L-valine production was further improved by disrupting brnQ. It is also revealed that weak acidic and aerobic conditions favor L-valine production. Based on these findings, L-valine production by metabolically engineered K. pneumonia was examined. In fed-batch fermentation, 22.4 g/L of L-valine was produced by the engineered K. pneumoniae ΔbudA-ΔldhA-ΔipdC-ΔbrnQ-ilvE after 55 h of cultivation, with a substrate conversion ratio of 0.27 mol/mol glucose.

The roles of diol dehydratase from pdu operon on glycerol catabolism in Klebsiella pneumoniae.

The dha operon of Klebsiella pneumoniae is responsible for glycerol catabolism and 1,3-propanediol formation. Subunits of glycerol dehydratase and the large subunit of glycerol dehydratase reactivating factor are encoded by dhaBCE and dhaF, respectively. Proteins of pdu operon form a microcompartment (bacteria organelle) and responsible for 1,2-propanediol catabolism. In this operon, pduCDE and pduG encode subunits of diol dehydratase and its reactivating factor. Diol dehydratase is an isofunctional enzyme of glycerol dehydratase, but its role in glycerol catabolism was not entirely clear. In this study, dhaBCE, pduCDE, dhaF, and pduG in K. pneumoniae were knocked out individually or combinedly. These strains were cultured with glycerol as a substrate, and dehydratase activities in the cytoplasm and microcompartment were detected. Results showed that glycerol dehydratase and diol dehydratase were simultaneously responsible for glycerol catabolism in K. pneumoniae. Besides being packaged in microcompartment, large amounts of diol dehydratase was also presented in the cytoplasm. However, the Pdu microcompartment reduced the accumulation of 3-hydroxypropionaldehyde in the fermentation broth. PduG can cross reactivate glycerol dehydratase instead of DhaF. However, DhaF is not involved in reactivation of diol dehydratase. In conclusion, diol dehydratase and Pdu microcompartment play important roles in glycerol catabolism in K. pneumoniae.

1,2-Propanediol production from glycerol via an endogenous pathway of Klebsiella pneumoniae.

Klebsiella pneumoniae is an important microorganism and is used as a cell factory for many chemicals production. When glycerol was used as the carbon source, 1,3-propanediol was the main catabolite of this bacterium. K. pneumoniae ΔtpiA lost the activity of triosephosphate isomerase and prevented glycerol catabolism through the glycolysis pathway. But this strain still utilized glycerol, and 1,2-propanediol became the main catabolite. Key enzymes of 1,2-propanediol synthesis from glycerol were investigated in detail. dhaD and gldA encoded glycerol dehydrogenases were both responsible for the conversion of glycerol to dihydroxyacetone, but overexpression of the two enzymes resulted in a decrease of 1,2-propanediol production. There are two dihydroxyacetone kinases (I and II), but the dihydroxyacetone kinase I had no contribution to dihydroxyacetone phosphate formation. Dihydroxyacetone phosphate was converted to methylglyoxal, and methylglyoxal was then reduced to lactaldehyde or hydroxyacetone and further reduced to form 1,2-propanediol. Individual overexpression of mgsA, yqhD, and fucO resulted in increased production of 1,2-propanediol, but only the combined expression of mgsA and yqhD showed a positive effect on 1,2-propanediol production. The process parameters for 1,2-propanediol production by Kp ΔtpiA-mgsA-yqhD were optimized, with pH 7.0 and agitation rate of 350 rpm found to be optimal. In the fed-batch fermentation, 9.3 g/L of 1,2-propanediol was produced after 144 h of cultivation, and the substrate conversion ratio was 0.2 g/g. This study provides an efficient way of 1,2-propanediol production from glycerol via an endogenous pathway of K. pneumoniae.Key points• 1,2-Propanediol was synthesis from glycerol by a tpiA knocked out K. pneumoniae• Overexpression of mgsA, yqhD, or fucO promote 1,2-propanediol production• 9.3 g/L of 1,2-propanediol was produced in fed-batch fermentation.

Equal mixing time enables scale-down and optimization of a CHO cell culture process using a shaken microbioreactor system.

The advancement of microbioreactor technology in recent years has transformed early- and mid-stage process development. The monitoring and control capabilities of microbioreactors not only promote the quick accumulation of process knowledge but has also led to an increased scalability when compared to traditionally used systems such as shake flasks and microtitre plates. This study seeks to establish a framework for the micro-Matrix microbioreactor (Applikon-Biotechnology BV) as process development tool. Using the Dual Indicator System for Mixing Time, the system was initially characterized for mixing properties at varying operating conditions, which was found to yield mixing times between 0.9 and 41.8 s. A matched mixing time was proposed as scale-down criterion for an IgG4 producing GS-CHO fed-batch process between a 5 L stirred tank reactor (STR) and the micro-Matrix microbioreactor. Growth trends, maximum viable cell concentrations, final titre, and glycoprofiles were nearly identical at both scales. The scale-down model was then employed to optimize a bolus feeding regime using response surface methodology, which led to a 25.4% increase of the space-time yield and a 25% increase of the final titre. The optimized feeding strategy was validated at the small-scale and successfully scaled up to the 5 L STR. This work for the first time provides a framework of how the micro-Matrix microbioreactor can be implemented in a bioprocess development workflow and demonstrates scalability of growth and production kinetics as well as IgG4 glycosylation between the micro-Matrix and a benchtop-scale STR system.

Strategy for Managing Industrial Anaerobic Sludge through the Heterotrophic Cultivation of Chlorella sorokiniana: Effect of Iron Addition on Biomass and Lipid Production.

Microalgae provides an alternative for the valorization of industrial by-products, in which the nutritional content varies substantially and directly affects microalgae system performance. Herein, the heterotrophic cultivation of Chlorella sorokiniana was systematically studied, allowing us to detect a nutritional deficiency other than the carbon source through assessing the oxygen transfer rate for glucose or acetate fermentation. Consequently, a mathematical model of the iron co-limiting effect on heterotrophic microalgae was developed by exploring its ability to regulate the specific growth rate and yield. For instance, higher values of the specific growth rate (0.17 h-1) compared with those reported for the heterotrophic culture of Chlorella were obtained due to iron supplementation. Therefore, anaerobic sludge from an industrial wastewater treatment plant (a baker's yeast company) was pretreated to obtain an extract as a media supplement for C. sorokiniana. According to the proposed model, the sludge extract allowed us to supplement iron values close to the growth activation concentration (KFe ~12 mg L-1). Therefore, a fed-batch strategy was evaluated on nitrogen-deprived cultures supplemented with the sludge extract to promote biomass formation and fatty acid synthesis. Our findings reveal that nitrogen and iron in sludge extract can supplement heterotrophic cultures of Chlorella and provide an alternative for the valorization of industrial anaerobic sludge.

Redirection of the central metabolism of Klebsiella pneumoniae towards dihydroxyacetone production.

BACKGROUND: Klebsiella pneumoniae is a bacterium that can be used as producer for numerous chemicals. Glycerol can be catabolised by K. pneumoniae and dihydroxyacetone is an intermediate of this catabolism pathway. Here dihydroxyacetone and glycerol were produced from glucose by this bacterium based a redirected glycerol catabolism pathway. RESULTS: tpiA, encoding triosephosphate isomerase, was knocked out to block the further catabolism of dihydroxyacetone phosphate in the glycolysis. After overexpression of a Corynebacterium glutamicum dihydroxyacetone phosphate dephosphorylase (hdpA), the engineered strain produced remarkable levels of dihydroxyacetone (7.0 g/L) and glycerol (2.5 g/L) from glucose. Further increase in product formation were obtained by knocking out gapA encoding an iosenzyme of glyceraldehyde 3-phosphate dehydrogenase. There are two dihydroxyacetone kinases in K. pneumoniae. They were both disrupted to prevent an inefficient reaction cycle between dihydroxyacetone phosphate and dihydroxyacetone, and the resulting strains had a distinct improvement in dihydroxyacetone and glycerol production. pH 6.0 and low air supplement were identified as the optimal conditions for dihydroxyacetone and glycerol production by K, pneumoniae ΔtpiA-ΔDHAK-hdpA. In fed batch fermentation 23.9 g/L of dihydroxyacetone and 10.8 g/L of glycerol were produced after 91 h of cultivation, with the total conversion ratio of 0.97 mol/mol glucose. CONCLUSIONS: This study provides a novel and highly efficient way of dihydroxyacetone and glycerol production from glucose.

Model-based workflow for scale-up of process strategies developed in miniaturized bioreactor systems.

Miniaturized bioreactor (MBR) systems are routinely used in the development of mammalian cell culture processes. However, scale-up of process strategies obtained in MBR- to larger scale is challenging due to mainly non-holistic scale-up approaches. In this study, a model-based workflow is introduced to quantify differences in the process dynamics between bioreactor scales and thus enable a more knowledge-driven scale-up. The workflow is applied to two case studies with antibody-producing Chinese hamster ovary cell lines. With the workflow, model parameter distributions are estimated first under consideration of experimental variability for different scales. Second, the obtained individual model parameter distributions are tested for statistical differences. In case of significant differences, model parametric distributions are transferred between the scales. In case study I, a fed-batch process in a microtiter plate (4 ml working volume) and lab-scale bioreactor (3750 ml working volume) was mathematically modeled and evaluated. No significant differences were identified for model parameter distributions reflecting process dynamics. Therefore, the microtiter plate can be applied as scale-down tool for the lab-scale bioreactor. In case study II, a fed-batch process in a 24-Deep-Well-Plate (2 ml working volume) and shake flask (40 ml working volume) with two feed media was investigated. Model parameter distributions showed significant differences. Thus, process strategies were mathematically transferred, and model predictions were simulated for a new shake flask culture setup and confirmed in validation experiments. Overall, the workflow enables a knowledge-driven evaluation of scale-up for a more efficient bioprocess design and optimization.

Ethylene glycol and glycolic acid production by wild-type Escherichia coli.

Ethylene glycol and glycolic acid are bulk chemicals with a broad range of applications. The ethylene glycol and glycolic acid biosynthesis pathways have been produced by microorganisms and used as a biological route for their production. Unlike the methods that use xylose or glucose as carbon sources, xylonic acid was used as a carbon source to produce ethylene glycol and glycolic acid in this study. Amounts of 4.2 g/L of ethylene glycol and 0.7 g/L of glycolic acid were produced by a wild-type Escherichia coli W3110 within 10 H of cultivation with a substrate conversion ratio of 0.5 mol/mol. Furthermore, E. coli strains that produce solely ethylene glycol or glycolic acid were constructed. 10.3 g/L of glycolic acid was produced by E. coli ΔyqhD+aldA, and the achieved conversion ratio was 0.56 mol/mol. Similarly, the E. coli ΔaldA+yqhD produced 8.0 g/L of ethylene glycol with a conversion ratio of 0.71 mol/mol. Ethylene glycol and glycolic acid production by E. coli on xylonic acid as a carbon source provides new information on the biosynthesis pathway of these products and opens a novel way of biomass utilization.

Digital Twins for Bioprocess Control Strategy Development and Realisation.

New innovative Digital Twins can represent complex bioprocesses, including the biological, physico-chemical, and chemical reaction kinetics, as well as the mechanical and physical characteristics of the reactors and the involved peripherals. Digital Twins are an ideal tool for the rapid and cost-effective development, realisation and optimisation of control and automation strategies. They may be utilised for the development and implementation of conventional controllers (e.g. temperature, dissolved oxygen, etc.), as well as for advanced control strategies (e.g. control of substrate or metabolite concentrations, multivariable controls), and the development of complete bioprocess control. This chapter describes the requirements Digital Twins must fulfil to be used for bioprocess control strategy development, and implementation and gives an overview of research projects where Digital Twins or "early-stage" Digital Twins were used in this context. Furthermore, applications of Digital Twins for the academic education of future control and bioprocess engineers as well as for the training of future bioreactor operators will be described. Finally, a case study is presented, in which an "early-stage" Digital Twin was applied for the development of control strategies of the fed-batch cultivation of Saccharomyces cerevisiae. Development, realisation and optimisation of control strategies utilising Digital Twins.

Production of 2,3-dihydroxyisovalerate by Enterobacter cloacae.

2,3-Dihydroxyisovalerate is an intermediate of the valine synthesis pathway. However, neither natural microorganisms nor valine producing engineered strains have been reported yet to produce this chemical. Based on the 2,3-butanediol synthesis pathway, a biological route of 2,3-dihydroxyisovalerate production was developed using a budA and ilvD disrupted Klebsiella pneumoniae strain in our previous research. We hypothesised, that other 2,3-butanediol producing bacteria could be used for 2,3-dihydroxyisovalerate production. Here a budA disrupted Enterobacter cloacae was constructed, and this strain exhibited a high 2,3-dihydroxyisovalerate producing ability. Disruption of ilvD in E. cloacae ΔbudA further increased 2,3-dihydroxyisovalerate level. The disruption of budA, encoding an acetolactate decarboxylase, resulted in the acetolactate synthesized in the 2,3-butanediol synthesis pathway to flow into the valine synthesis pathway. The additional disruption of ilvD, encoding a dihydroxy acid dehydratase, prevented the 2,3-dihydroxyisovalerate to be further metabolized in the valine synthesis pathway. Thus, the disruption of both budA and ilvD in 2,3-butanediol producing strains might be an universal strategy for 2,3-dihydroxyisovalerate accumulation. After optimization of the medium components and culture parameters 31.2 g/L of 2,3-dihydroxyisovalerate was obtained with a productivity of 0.41 g/L h and a substrate conversion ratio of 0.56 mol/mol glucose in a fed-batch fermentation. This approach provides an economic way for 2,3-dihydroxyisovalerate production.

2,3-Dihydroxyisovalerate production by Klebsiella pneumoniae.

2,3-Dihydroxyisovalerate is an intermediate of valine and leucine biosynthesis pathway; however, no natural microorganism has been found yet that can accumulate this compound. Klebsiella pneumoniae is a useful bacterium that can be used as a workhorse for the production of a range of industrially desirable chemicals. Dihydroxy acid dehydratase, encoded by the ilvD gene, catalyzes the reaction of 2-ketoisovalerate formation from 2,3-dihydroxyisovalerate. In this study, an ilvD disrupted strain was constructed which resulted in the inability to synthesize 2-ketoisovalerate, yet accumulate 2,3-dihydroxyisovalerate in its culture broth. 2,3-Butanediol is the main metabolite of K. pneumoniae and its synthesis pathway and the branched-chain amino acid synthesis pathway share the same step of the α-acetolactate synthesis. By knocking out the budA gene, carbon flow into the branched-chain amino acid synthesis pathway was upregulated, which resulted in a distinct increase in 2,3-dihydroxyisovalerate levels. Lactic acid was identified as a by-product of the process and by blocking the lactic acid synthesis pathway, a further increase in 2,3-dihydroxyisovalerate levels was obtained. The culture parameters of 2,3-dihydroxyisovalerate fermentation were optimized, which include acidic pH and medium level oxygen supplementation to favor 2,3-dihydroxyisovalerate synthesis. At optimal conditions (pH 6.5, 400 rpm), 36.5 g/L of 2,3-dihydroxyisovalerate was produced in fed-batch fermentation over 45 h, with a conversion ratio of 0.49 mol/mol glucose. Thus, a biological route of 2,3-dihydroxyisovalerate production with high conversion ratio and final titer was developed, providing a basis for an industrial process. Key Points • A biological route of 2,3-dihydroxyisovalerate production was setup. • Disruption of budA causes 2,3-dihydroxuisovalerate accumulation in K. pneumoniae. • Disruption of ilvD prevents 2,3-dihydroxyisovalerate reuse by the cell. • 36.5 g/L of 2,3-dihydroxyisovalerate was obtained in fed-batch fermentation.

Bioprocess considerations for T-cell therapy: Investigating the impact of agitation, dissolved oxygen, and pH on T-cell expansion and differentiation.

Adoptive T-cell therapy (ACT) has emerged as a promising new way to treat systemic cancers such as acute lymphoblastic leukemia. However, the robustness and reproducibility of the manufacturing process remains a challenge. Here, a single-use 24-well microbioreactor (micro-Matrix) was assessed for its use as a high-throughput screening tool to investigate the effect and the interaction of different shaking speeds, dissolved oxygen (DO), and pH levels on the growth and differentiation of primary T cells in a perfusion-mimic process. The full factorial design allowed for the generation of predictive models, which were used to find optimal culture conditions. Agitation was shown to play a fundamental role in the proliferation of T cells. A shaking speed of 200 rpm drastically improved the final viable cell concentration (VCC), while the viability was maintained above 90% throughout the cultivation. VCCs reached a maximum of 9.22 × 106 cells/ml. The distribution of CD8+ central memory T cells (TCM ), was found to be largely unaffected by the shaking speed. A clear interaction between pH and DO (p < .001) was established for the cell growth and the optimal culture conditions were identified for a combination of 200 rpm, 25% DO, and pH of 7.4. The combination of microbioreactor technology and Design of Experiment methodology provides a powerful tool to rapidly gain an understanding of the design space of the T-cell manufacturing process.

Ethylene glycol and glycolic acid production from xylonic acid by Enterobacter cloacae.

BACKGROUND: Biological routes for ethylene glycol production have been developed in recent years by constructing the synthesis pathways in different microorganisms. However, no microorganisms have been reported yet to produce ethylene glycol naturally. RESULTS: Xylonic acid utilizing microorganisms were screened from natural environments, and an Enterobacter cloacae strain was isolated. The major metabolites of this strain were ethylene glycol and glycolic acid. However, the metabolites were switched to 2,3-butanediol, acetoin or acetic acid when this strain was cultured with other carbon sources. The metabolic pathway of ethylene glycol synthesis from xylonic acid in this bacterium was identified. Xylonic acid was converted to 2-dehydro-3-deoxy-D-pentonate catalyzed by D-xylonic acid dehydratase. 2-Dehydro-3-deoxy-D-pentonate was converted to form pyruvate and glycolaldehyde, and this reaction was catalyzed by an aldolase. D-Xylonic acid dehydratase and 2-dehydro-3-deoxy-D-pentonate aldolase were encoded by yjhG and yjhH, respectively. The two genes are part of the same operon and are located adjacent on the chromosome. Besides yjhG and yjhH, this operon contains four other genes. However, individually inactivation of these four genes had no effect on either ethylene glycol or glycolic acid production; both formed from glycolaldehyde. YqhD exhibits ethylene glycol dehydrogenase activity in vitro. However, a low level of ethylene glycol was still synthesized by E. cloacae ΔyqhD. Fermentation parameters for ethylene glycol and glycolic acid production by the E. cloacae strain were optimized, and aerobic cultivation at neutral pH were found to be optimal. In fed batch culture, 34 g/L of ethylene glycol and 13 g/L of glycolic acid were produced in 46 h, with a total conversion ratio of 0.99 mol/mol xylonic acid. CONCLUSIONS: A novel route of xylose biorefinery via xylonic acid as an intermediate has been established.

Using a Parallel Micro-Cultivation System (Micro-Matrix) as a Process Development Tool for Cell Culture Applications.

Micro-bioreactors appear frequently in today's biotechnology industry as screening and process development tools for cell culture applications. The micro-bioreactor's small volume allows for a high throughput, and when compared to other small-scale systems, such as microtiter plates, its measurement and control capabilities offer a much better insight into the bioprocess. Applikon's micro-Matrix is one of the micro-bioreactors that are commercially available today. The micro-Matrix system consists of shaken disposable 24 deep square well plates in which each well is controlled individually for pH, dissolved oxygen (DO), and temperature. Additionally, a feeding module supports automated additions of liquid to each well. This chapter describes how the micro-Matrix can be used for fed-batch cultivations of Chinese Hamster Ovary (CHO) cells.

Towards the development of automated fed-batch cell culture processes at microscale.

Aim: To investigate the impact of various feeding strategies on the growth and productivity of a GS-CHO cell line. Methods: Feed additions were conducted at fixed volumes or linked to a marker such as cell growth or metabolism and added as bolus or near-continuously using the automated feeding module of the micro-Matrix (Applikon). Results: The selected feeding regimens supported maximum viable cell densities of up to 1.9 × 107 cells ml-1 and final titers of up to 1.13 g l-1. Differences in growth and titer between feeding strategies were insignificant, with the exception of one feeding strategy. Conclusion: As the more complex feeding strategies did not create an advantage, the selection of a simple feeding strategy such as bolus or continuous addition of feed medium is preferred.

Improving Product Specificity of Whole-Cell Alkane Oxidation in Nonconventional Media: A Multivariate Analysis Approach.

Two-liquid-phase reaction media have long been used in bioconversions to supply or remove hydrophobic organic reaction substrates and products to reduce inhibitory and toxic effects on biocatalysts. In case of the terminal oxyfunctionalization of linear alkanes by the AlkBGT monooxygenase the excess alkane substrate is often used as a second phase to extract the alcohol, aldehyde, and acid products. However, the selection of other carrier phases or surfactants is complex due to a large number of parameters that are involved, such as biocompatibility, substrate bioavailability, and product extraction selectivity. This study combines systematic high-throughput screening with chemometrics to correlate physicochemical parameters of a range of cosolvents to product specificity and yield using a multivariate regression model. Partial least-squares regression shows that the defining factor for product specificity is the solubility properties of the reaction substrate and product in the cosolvent, as measured by Hansen solubility parameters. Thus the polarity of cosolvents determines the accumulation of either alcohol or acid products. Whereas usually the acid product accumulates during the reaction, by choosing a more polar cosolvent the 1-alcohol product can be accumulated. Especially with Tergitol as a cosolvent, a 3.2-fold improvement in the 1-octanol yield to 18.3 mmol L-1 is achieved relative to the control reaction without cosolvents.

Optimisation of enzyme cascades for chiral amino alcohol synthesis in aid of host cell integration using a statistical experimental design approach.

Chiral amino alcohols are compounds of pharmaceutical interest as they are building blocks of sphingolipids, antibiotics, and antiviral glycosidase inhibitors. Due to the challenges of chemical synthesis we recently developed two TK-TAm reaction cascades using natural and low cost feedstocks as substrates: a recycling cascade comprising of 2 enzymes and a sequential 3-step enzyme cascade yielding 30% and 1% conversion, respectively. In order to improve the conversion yield and aid the future host strain engineering for whole cell biocatalysis, we used a combination of microscale experiments and statistical experimental design. For this we implemented a full factorial design to optimise pH, temperature and buffer type, followed by the application of Response Surface Methodology for the optimisation of substrates and enzymes concentrations. Using purified enzymes we achieved 60% conversion for the recycling cascade and 3-fold improvement using the sequential pathway. Based on the results, limiting steps and individual requirements for host cell metabolic integration were identified expanding the understanding of the cascades without implementing extensive optimisation modelling. Therefore, the approach described here is well suited for optimising reaction conditions as well as defining the relative enzyme expression levels required for construction of microbial cell factories.

A Microfluidic System for the Investigation of Tumor Cell Extravasation.

Metastatic dissemination of cancer cells is a very complex process. It includes the intravasation of cells into the metastatic pathways, their passive distribution within the blood or lymph flow, and their extravasation into the surrounding tissue. Crucial steps during extravasation are the adhesion of the tumor cells to the endothelium and their transendothelial migration. However, the molecular mechanisms that are underlying this process are still not fully understood. Novel three dimensional (3D) models for research on the metastatic cascade include the use of microfluidic devices. Different from two dimensional (2D) models, these devices take cell⁻cell, structural, and mechanical interactions into account. Here we introduce a new microfluidic device in order to study tumor extravasation. The device consists of three different parts, containing two microfluidic channels and a porous membrane sandwiched in between them. A smaller channel together with the membrane represents the vessel equivalent and is seeded separately with primary endothelial cells (EC) that are isolated from the lung artery. The second channel acts as reservoir to collect the migrated tumor cells. In contrast to many other systems, this device does not need an additional coating to allow EC growth, as the primary EC that is used produces their own basement membrane. VE-Cadherin, an endothelial adherence junction protein, was expressed in regular localization, which indicates a tight barrier function and cell⁻cell connections of the endothelium. The EC in the device showed in vivo-like behavior under flow conditions. The GFP-transfected tumor cells that were introduced were of epithelial or mesenchymal origin and could be observed by live cell imaging, which indicates tightly adherent tumor cells to the endothelial lining under different flow conditions. These results suggest that the new device can be used for research on molecular requirements, conditions, and mechanism of extravasation and its inhibition.